|
Post by kawonda750 on Apr 12, 2021 12:09:45 GMT -5
Working on that soon, Brad. Right now I am collecting parts. The KH was a quick fix so I went with it first so I could ride it right away.
|
|
|
Post by kawonda750 on Apr 17, 2021 13:33:58 GMT -5
Clutch was worn so since I had new plates in stock, and it's cold, I replaced them todaY. i Can actually get into neutral when stopped. My new Hellfire pipes have been shipped too. These modified Wirges will go on the Wanna B.
|
|
|
Post by kawonda750 on Apr 26, 2021 11:44:40 GMT -5
Just like Christmas in April. Painting them now. I decided against Mop n Glow cuz I'm lazy and would rather do them once and forget it. We'll see how they work if the rain stops.
|
|
|
Post by kawonda750 on Apr 27, 2021 11:00:35 GMT -5
Painted and installed. Nice sound , a little more torquey.
|
|
|
Post by kawonda750 on Apr 27, 2021 11:02:02 GMT -5
|
|
roadrash
2nd Gear
10 McNab St.E. Port Dover
Posts: 272
|
Post by roadrash on Apr 27, 2021 12:02:56 GMT -5
#3 cylinder pipe should be alot further in.Almost above #2.Just your Bro talking!
|
|
|
Post by kawonda750 on Apr 27, 2021 12:23:15 GMT -5
I think it's how he designed them. The brackets fit perfectly. These are Hellfires not DEncos. I sent him the pics so maybe he'll let me know if it's right. Pipes are tucked right in.
Now get your 400 out......
|
|
|
Post by zambia on Apr 27, 2021 16:38:12 GMT -5
The two hangers on that side should be 100% in contact - not 1 on each side of the footpeg mount. I can't tell from the images, but I have put my TNTs on incorrectly and they don't look nestled together (spooning ... if you remember your days in junior hockey or summer camp).
|
|
|
Post by kawonda750 on Apr 27, 2021 17:23:05 GMT -5
They are both in the insude, footpeg nut side
|
|
|
Post by autofobe on Jun 20, 2021 17:31:17 GMT -5
When you opened up the wirges was there a baffle in there,What was the original length of the centre section and then what was the new length of the centre section after you shortened them. I have a set of wirges but not sure if they are h2 or h1.
Brad
|
|