|
|
Post by Ned on Sept 28, 2015 8:02:55 GMT -5
Well, I finally made it to Ottawa to pick the bike up.   Got it home, gave it a quick bath and started on it.  The centre carb slide and plunger were stuck in their bores so I removed both sets of cables from the bike and soaked the carb in hot water until they were free. The carbs were filthy on the outside (still are) but I pulled them apart, soaked them in cleaner and put them back together. All the brass inside was like new and all to original spec. |
|
|
|
Post by 42sixHemi on Sept 28, 2015 9:25:46 GMT -5
Sweet looking bike I like the fairing!!
|
|
|
|
Post by H2 Dude on Sept 28, 2015 11:03:50 GMT -5
good score at $350 Can't go wrong
|
|
|
|
Post by kawonda750 on Sept 28, 2015 13:59:42 GMT -5
yeah, I'm going to work all winter to get mine to look like that. @#@#$#@&^!!!
|
|
|
|
Ned's S2
Sept 28, 2015 16:57:35 GMT -5
via mobile
Post by shiloh on Sept 28, 2015 16:57:35 GMT -5
Nice bike, going to keep it as is and ride it, or tear it down?
|
|
|
|
Post by Mitch E on Sept 28, 2015 16:58:15 GMT -5
Whats your over all plans with this gem Dave? keeping it stock? I was on a 500 with a 3into1 at Rb's and steve (III) was pulling along right beside the damn thing on an S2, would make a sweet little track bike for only a buck a cc. plus passing 4 strokes would feel even cooler on only 350cc's
|
|
|
|
Post by Ned on Sept 28, 2015 17:07:09 GMT -5
I plan on getting it running and then probably leave it in a corner of my garage next to the S1.
|
|
|
|
Post by Walms on Sept 28, 2015 17:24:27 GMT -5
I plan on getting it running and then probably leave it in a corner of my garage next to the S1. Sounds exciting! lol |
|
browney
2nd Gear
Goin' Crazy Wanna Come............
Posts: 361 
|
Post by browney on Sept 29, 2015 5:20:30 GMT -5
I plan on getting it running and then probably leave it in a corner of my garage next to the S1. You know Dave you can move that nice S2 more to the middle of the garage if you get rid of that Z1R. I will take the Z1R off your hands to help make room up for you if you would like.  browney out  |
|
|
|
Post by Ned on Sept 29, 2015 7:25:26 GMT -5
I plan on getting it running and then probably leave it in a corner of my garage next to the S1. You know Dave you can move that nice S2 more to the middle of the garage if you get rid of that Z1R. I will take the Z1R off your hands to help make room up for you if you would like. browney out Ya, sure, let me think about that.  |
|
|
|
Post by Mitch E on Sept 29, 2015 8:58:00 GMT -5
I plan on getting it running and then probably leave it in a corner of my garage next to the S1. Must be nice
|
|
|
|
Post by Ned on Sept 30, 2015 6:32:20 GMT -5
Well, all the lights work but it needs a rear brake switch. The horn works and there is tons of spark!
I dropped the tank off yesterday to have it cleaned and lined. I am hoping to have it back by Friday.
You wouldn't believe the tread on these 30 odd years old Dunlops. I think a bit of Armor All and they will be as good as new.
|
|
|
|
Post by drewski on Sept 30, 2015 8:14:52 GMT -5
Well, all the lights work but it needs a rear brake switch. The horn works and there is tons of spark! I dropped the tank off yesterday to have it cleaned and lined. I am hoping to have it back by Friday. You wouldn't believe the tread on these 30 odd years old Dunlops. I think a bit of Armor All and they will be as good as new.  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 30, 2015 17:41:37 GMT -5
which cylinder gets the temp gauge, or does it average out the 3?
|
|
|
|
Ned's S2
Sept 30, 2015 18:58:15 GMT -5
via mobile
Post by sf on Sept 30, 2015 18:58:15 GMT -5
which cylinder gets the temp gauge, or does it average out the 3? I was thinking the same thing |
|
+-+MAD+MAX.gif)
