|
Post by lc on Mar 19, 2015 15:45:35 GMT -5
|
|
|
Post by oilman on Mar 19, 2015 16:00:29 GMT -5
Thank you for the suggestions.
|
|
|
Post by Ned on Mar 19, 2015 17:16:43 GMT -5
Use the 3 bond! Don't use silicone.
|
|
|
Post by JA-Moo on Mar 19, 2015 17:18:21 GMT -5
|
|
|
Post by oilman on Mar 19, 2015 21:01:10 GMT -5
The video is good. Never thought to youtube it. Is the Permetex grey silicone?!
|
|
|
Post by JA-Moo on Mar 19, 2015 21:18:45 GMT -5
It's threebond 1184 I think now...... I don't like to use silicone in my motors.
|
|
|
Post by sooperarthur on Mar 19, 2015 21:51:46 GMT -5
Or is it 1104? There is three versions, 2 of them have been deemed poisonous
|
|
|
Post by 2smoke on Mar 19, 2015 22:04:42 GMT -5
Permatex grey motoseal one is not silicone. It works well, I have used it with many a 2 stroke rebuild. Its as good as the threebond and the yamabond. Don't skimp with it but don't go overboard. It starts to skim over quick so once you start with it, move quick and don't have any distractions like the wife or a telephone call.
|
|
|
Post by JA-Moo on Mar 19, 2015 23:32:18 GMT -5
The old 1104 had lead in it, I'm sure if you ate a few tubes you would get sick.....lol. I think it's 1184 now.
|
|
|
Post by sooperarthur on Mar 20, 2015 1:07:24 GMT -5
I checked my stash. I still have a tube of 1104 and two 1194!
|
|
|
Post by oilman on Mar 29, 2015 16:47:18 GMT -5
youtu.be/I5PTQk-vD9wFirst start. I just managed to get the pump primed. I hope that ringing on the left pot is just poor timing or something simple. I threw fifty to one fuel in for the initial start up.
|
|